Crocodile Acrylic Seal Plus white 450g

$3.00$3.25

In stock

Compare
SKU: Acrylic Seal Plus Category: Tag:

Crocodile Adheicikk is a high quality multi-purpose nail adhesive for water construction. Repair all types High adhesion power, used to attach materials instead of nails, with high initial adhesion strength Can be used both inside and outside Good adhesion to porous materials such as wood, cement, fiber cement, natural stone, stone, vinyl, brick blocks etc.

Acrylic fillings, high quality grout mixed with fungicides

  • With flexible, tight grip
  • Mixed with anti-fungal substances
  • Moisture resistant and water resistant
  • Not yellow
  • Can be painted when dry

usage condition 
Use the edge of the door, window, and the general groove can be used with the moving groove. Suitable for interior work, such as the installation of frames, doors, windows, joints between the edge of the aluminum frame and the edge of the cement wall. Built-in furniture installation Installation of sanitary wares and fittings for tile and wall           sealings, etc. 

Specification

Type Acrylic Seal Plus
Standard ASTM C661, ASTM D412,
ASTM C794, ASTM C679
Product Color white, brown, cherry color, oak color
packing size 450 grams

How to use

Crocodile Adheicikk is a high quality multi-purpose nail adhesive for water construction. Repair all types High adhesion power, used to attach materials instead of nails, with high initial adhesion strength Can be used both inside and outside Good adhesion to porous materials such as wood, cement, fiber cement, natural stone, stone, vinyl, brick, block, etc. Surface preparation  The condition of the surface must be clean and dry, free from dust, grease, oil stains or other material debris. The surface of one side of the material must be porous, absorb, clean and remove. The use of cutting the stopper to a width of at least 4 mm, tightly attached to the tube, glue the nail with a glue gun. On the surface as follows

  • Shot as a point in case the surface is not smooth evenly
  • Vertical shot in vertical In the case of adhesion materials that are small or in a horizontal case
  • Zigzag shot, in which the material that is attached is large, vertically mounted, the distance between 5-10 cm, depending on the weight of the material to be seized Keep pressing the material tightly. Leave for 3-5 minutes. In the case of a large piece of heavy weight, use the material to support during braking. Solidified adhesive, which the adhesive will harden within 24-48 hours

Clean , clean all tools and equipment. With a dry cloth immediately before the glue is dry As for residual and hardened adhesive debris, remove them using abrasion and scrape the knife. Restrictions on use

  • The contact surface should not be over 30 ° C or humidity.
  • Avoid confiscating heavy materials or metal plates in sunny conditions.
  • For plastic sticking, should be tested before the actual use. It is not recommended to use certain surface materials such as PE, PP or asphalt.
  • Not recommended to use the type that is soaked all the time.

Warning

  • Should use various safety equipment such as gloves, dust masks, glasses, etc.
  • If being exposed to the skin, use soap and water to clean. In case of contact with eyes, rinse your eyes with clean water several times immediately and consult a doctor.
  • Should be kept out of the reach of children

Storage shelf life 1 year from the date of manufacture in sealed containers Stored in a dry environment with a roof covered from sunlight in temperatures between (10 – 25 ° C)

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

CATEGORIES