Crocodile Adhesive Nail 300G/20P

$3.00$3.25

Out of stock

Compare
SKU: C10060650 Category: Tag:

Crocodile Adheilene Formula Solvent has fast drying properties, firm adhesion, used for bonding various materials. Instead of nailing nails For construction and maintenance Can be used both inside and outside to provide high adhesion strength and dry faster than water formulas When fully dry, it can hold more than 180 kg per square meter, can be attached to a variety of material surfaces such as lotus wood, eyebrows, synthetic wood, stone, ornamental stone, vinyl, concrete, brick, wood block, fiber cement, wood MDF, uPVC, other plastics, metal, clear glass, mirror, foam, etc.

Multi-purpose solvent nails

  • Solvent-based adhesives, fast drying and tightly bonded over water formulations
  • When dry, the adhesive is hard, not flexible.
  • Adhesion on various surfaces Both horizontal and vertical
  • Durable, excellent for air And the environment such as UV radiation, vibration, humidity, ozone, temperature changes Air pollution both outside and inside
  • Can be used with polystyrene foam and glass
  • Can be painted when dry

usage condition 
Suitable for cornice, lotus ceiling, floor coverings / repairing parquet wood floors, ceramic tiles, decorative stone, mirror lath, 

Specification

Type Crocodile Adhesive Nail
standard ASTM C661, ASTM D412, ASTM C794
ASTM C679
Product Color light brown
packing size 300 ml

How to use

Crocodile Adheilene Formula Solvent has fast drying properties, firm adhesion, used for bonding various materials. Instead of nailing nails For construction and maintenance Can be used both inside and outside to provide high adhesion strength and dry faster than water formulas When fully dry, it can hold more than 180 kg per square meter, can be attached to a variety of material surfaces such as lotus wood, eyebrows, synthetic wood, stone, ornamental stone, vinyl, concrete, brick, wood block, fiber cement, wood MDF, uPVC, other plastics, metal, clear glass, mirror, foam, etc. Surface preparation  The condition of the surface must be clean and dry with the same condition throughout, without grease, dust or particles. Small size, if found that there are water debris, white cement Or debris that is scattered on Floor material To clean and remove the glue usage rate of 300 ml can be attached to 18 m long (shot in 4 mm size) Using

  1. Cut the stopper to a width of at least 4 mm. Tighten the tube.
  2. Injection of nails with glue gun Onto the surface that will hold the material as follows
    • Shot as a point in case the surface is not smooth evenly
    • In a straight line in the vertical direction, if the mounting material is small or in the case of a flat attachment
    • Zigzag-like case in which the material that is attached is large, mounted vertically
  3. The distance between the rows is about 5-10 cm, depending on the weight of the material to be attached. Press the material firmly to the surface.
  4. Before pressing the clamp, stick and pull out (approximately 3-5 minutes) and then press the new mounting bracket. To make the adhesive surface open and the inner surface touches the work surface and the surface on both sides before pressing the new firmly In the case of heavy bonded materials May require clamping or bracing to allow the glue to dry completely for about 24 hours

Clean , clean all tools and equipment with Tin En Before the glue is dry As for residual and rigid adhesive fragments, remove them using abrasion or scrape. Restrictions on use

  • The contact surface should not be over 80 ° C or humidity.
  • Avoid confiscating heavy materials or metal plates in sunny conditions.
  • Some materials such as plastic, PE, acrylic or painted surfaces Test the adhesion before use.
  • Not recommended to use types that are immersed in water all the time.

Warning

  • Should use various safety equipment such as gloves, dust masks, glasses, etc.
  • If being exposed to the skin, use soap and water to clean. In case of contact with eyes, rinse your eyes with clean water several times immediately and consult a doctor.
  • Should be kept out of the reach of children

Storage shelf life 1 year from the date of manufacture in sealed containers Stored in a dry environment with a roof covered from sunlight in temperatures between (10 – 25 ° C)

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

CATEGORIES