No products in the cart.
Roll over image to zoom in
Click to open expanded view
Crocodile Adhesive Quick 280ml (white)
Crocodile Adheicikk is a high quality multi-purpose nail adhesive for water construction. Repair all types High adhesion power, used to attach materials instead of nails, with high initial adhesion strength Can be used both inside and outside Good adhesion to porous materials such as wood, cement, fiber cement, natural stone, stone, vinyl, brick blocks etc.
Water-based high-quality multi-purpose nail glue
- With high adhesion efficiency Durable, suitable for bonding instead of nails
- Fast adhesion
- Suitable for uneven surface materials
- Friendly to the environment
- Without chemical solvents
- Good adhesion to various types of construction materials
- Excellent durability Can be used both inside and outside
Suitable for bonding various types of tight materials such as wood, plastic, sheets, interior materials, stone, metal tiles, etc. to porous work pieces such as concrete, plaster, real wood, plywood, etc. Suitable for decoration, repair, whole work Plane and overhead work such as eyebrows, lotus, lotus ceiling, ceiling
|Standard||ASTM C661, ASTM D412, ASTM C794, ASTM C679|
|Packing size||280 ml|
How to use
Crocodile Adheicikk is a high quality multi-purpose nail adhesive for water construction. Repair all types High adhesion power, used to attach materials instead of nails, with high initial adhesion strength Can be used both inside and outside Good adhesion to porous materials such as wood, cement, fiber cement, natural stone, stone, vinyl, brick, block, etc. Surface preparation The condition of the surface must be clean and dry, free from dust, grease, oil stains or other material debris. The surface of one side of the material must be porous, absorb, clean and remove. The use of cutting the stopper to a width of at least 4 mm, tightly attached to the tube, glue the nail with a glue gun. On the surface as follows
- Shot as a point in case the surface is not smooth evenly
- Vertical shot in vertical In the case of adhesion materials that are small or in a horizontal case
- Zigzag shot, in which the material that is attached is large, vertically mounted, the distance between 5-10 cm, depending on the weight of the material to be seized Keep pressing the material tightly. Leave for 3-5 minutes. In the case of a large piece of heavy weight, use the material to support during braking. Solidified adhesive, which the adhesive will harden within 24-48 hours
Clean , clean all tools and equipment. With a dry cloth immediately before the glue is dry As for residual and hardened adhesive debris, remove them using abrasion and scrape the knife. Restrictions on use
- The contact surface should not be over 30 ° C or humidity.
- Avoid confiscating heavy materials or metal plates in sunny conditions.
- For plastic sticking, should be tested before the actual use. It is not recommended to use certain surface materials such as PE, PP or asphalt.
- Not recommended to use the type that is soaked all the time.
- Should use various safety equipment such as gloves, dust masks, glasses, etc.
- If being exposed to the skin, use soap and water to clean. In case of contact with eyes, rinse your eyes with clean water several times immediately and consult a doctor.
- Should be kept out of the reach of children
Storage shelf life 1 year from the date of manufacture in sealed containers Stored in a dry environment with a roof covered from sunlight in temperatures between (10 – 25 ° C)