Crocodile Poly-U Seal (white) 310ml/20P

$8.00$8.50

Out of stock

Compare
SKU: C10032233 Category: Tag:

Crocodile, Poly-U, seal, material, type Polyurethane finished, ready to use, easy to use, highly flexible Resistant to weather conditions Can hold many surfaces such as concrete, stone, brick, aluminum, roof tiles Ceramic tiles, wood, etc.

Polyurethane sealant

  • Can be fixed in the place where there is movement
  • With high elasticity> 650%
  • Can be used both inside and outside
  • Can be painted over Without foundation
  • Fast dry

usage condition

  • Used to finish the construction of concrete slabs Masonry wall
  • Used to break the groove together Structure joints Do not crack for leakage.
  • Used to fill the grooves around the edge of the window and door, wood, aluminum, stainless steel, metal
  • Use to reduce the wall of the building. Both metal, concrete, plaster, smooth tiles Prefabricated wall panels
  • Use to reduce the wall of the building. Both metal, concrete, plaster, smooth tiles Prefabricated wall panels
  • Used to cover roof tiles
  • Use grout for ceramic tiles, stone, sanitary ware

Specification

Type Poly-U Seal
Standard ASTM C661, ASTM D412, ASTM C794
ASTM C679
Product Color Gray, White
Packing Size 310 ml / 600 ml

How to use

Poly-U Seal Crocodile is a type of material Polyurethane finished, ready to use, easy to use, highly flexible Resistant to weather conditions Can hold many surfaces such as concrete, stone, brick, aluminum, roof tiles Ceramic tiles, wood, etc. Surface preparation

  1. The surface must be dry, clean, free from dust, paint, oil stains or dirt.
  2. Suitable groove size Should be about 3-12 mm wide, 5-15 mm deep. The width should be equal to or greater than the depth of the groove. May use the foam to continue to adjust the depth of the fitting
  3. Use the adhesive tape to close the seam so that the excess does not come out in the direction of extension.

Using

  1. Cut the tip of the tube and the tip of the tip (45 degrees oblique) and wear the cork to the tube.
  2. Use a double or compressed air gun. Squeeze the glue in the groove that needs to be filled.
  3. Smooth the glue to 10-20 minutes.
  4. Wipe excess water with a damp cloth or sponge.
  5. Peel off the adhesive paper side by side within 10-15 minutes before the silicone is dry.
  6. Leave 48-72 hours before use

Usage rate

  • The groove size 1×1 cm can be about 3 meters per 300 ml.

Cleaning  Clean all tools and equipment With clean water before the glue will dry Residual glue fragments And hard to remove by using abrasive or knife scrape Warning

  • Not recommended for use in areas that are constantly immersed in water.
  • The product may cause skin irritation. Should use various safety equipment such as gloves, dust masks, glasses, etc.
  • If being exposed to the skin, use soap and water to clean. In case of contact with eyes, rinse eyes with clean water. Once and immediately consult a doctor
  • Should be kept out of the reach of children

Storage

  • Should be stored in a dry place And the temperature is not too high
  • Product life 1 year from production date
Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

CATEGORIES