Crocodile Turbo Plus Tile Grout white 0.5kg/bag

$4.99$8.55

Clear
Compare
SKU: Turbo Plus Tile Grout white Category: Tag:

Gator Turbo Plus grout is a fine grout for special formulations. Enhanced mixtures and special colors Has a good flow rate Giving high compressive strength, tough surface, high durability, protection against black mold and stains, reducing white stains Used for paving work on granite countertops, marble, granite, high adhesion with small grooves. Not peeling off, resistant to scratches Safe for health Can be both inside and outside the building Especially in areas that require high durability, such as swimming pools, garages, saunas

America Standard Sealant For ultra small grout grooves

  • The texture of the adhesive grout is deep. Hold a small groove For the grout 0.2-5 mm.
  • Fast drying, can activate the area within 6 hours
  • Resistant to chemicals and acids than general grout adhesives
  • Inhibit black mold and moss with micro-flat technology
  • Reduce stains and ingrained with hydrophobics
  • Reduce the occurrence of white stains in one place with WCAC Technology

Additional information

Type

0.5Kg, 1Kg

Specification

Type Turbo Plus Tile Grout white
Color White
American standard ANSI A 118.6 (Unsanded)
ANSI A 118.7 (Unsanded)
European standards EN 13888 CG2
Product color 8 shades
Packing size 0.5 kg / bag

How to use

Gator Turbo Plus grout is a fine grout for special formulations. Enhanced mixtures and special colors Has a good flow rate Giving high compressive strength, tough surface, high durability, protection against black mold and stains, reducing white stains Used for paving work on granite countertops, marble, granite, high adhesion with small grooves. Not peeling off, resistant to scratches Safe for health Can be both inside and outside the building Especially in areas requiring high endurance, such as swimming pool, garage, sauna recommendations width groove grout should not exceed 0.2 to 5 mm. The depth of the groove should be at least 2/3 of the tile thickness. The grout must be done after 48 hours or after the curing adhesive cement is complete. Surface preparation Clean the grout grooves to be free from dust, dirt, debris, and prevent water from getting trapped before grout.Mixture ratio Ground measuring 0.2 to 1.0 mm. : Adhesives 0.5 kg per 0.165 liters of water grout 3 parts water to 1 part by volume, size 2-5 mm.         : Adhesives 0.5 kg of water per 0.15 liters of glue. 4 parts grout per 1 part water by volume , wall work size 0.2-1.0 mm  .: 0.5 kg grout glue per 0.15 liters of water : 4 grout glue per 1 part water by volume, size 2-5 mm        : Glue 0.5 gram per 0.14 liter of water : 5 grout glue per 1 part water by volumeMixing

  • Pour the grout glue into the water. While turning the mixer around low or stirring well
  • Should use the grout glue within 30 minutes
  • When the adhesive grout is thick Due to leaving it for too long or too long, do not add water to make it liquid. Should be discarded and mixed again

Using

  1. Use a rubber screed trowel that is well blended to fill the groove. By making a oblique angle and groove to prevent the rubber trowel from pulling the grout out of the groove Use the trowel to scrape off the surface of the tile as much as possible.
  2. Leave until the grout glue begins to incubate. So use a cloth or sponge moistened with water and wring thoroughly Then use a dry cloth to wipe the surface of the tile again

Curing and grouting for the first 6 hours should use sticky paper. (Brown paper used to make bags or wrappers) to help seal the glue gradually curing and help prevent dust or other dirt Stick to the surface of the grout that has not dried Do not use plastic or newspaper paper instead of sticky paper.  Cleaning after 2 days should clean the tile surface again. To allow the adhesive grout that may be left out of the tile surface By using soapy water mixed with warm water to pour all over Leave for a while Therefore wipe clean Do not use concentrated solutions or acids. Because it will corrode the grout glue and may cause the color of the sealant to change

  • If necessary, use diluted acids or crocodile cleaners to clean the grout grooves. But should test in a small area first
  • The use of a polish remover or stain remover should be done after the curing glue is completely cured. Which must not be less than 30 days and should be tested in a small area first

Warning

  • Should not be used with areas that are exposed to acids all the time
  • Cement may cause skin irritation. Should use various safety equipment such as gloves, dust masks, goggles
  • In case of eye contact, rinse the eyes with clean water several times immediately. And consult a doctor
  • If being exposed or exposed to the skin Use clean water and soap.
  • Should be kept out of the reach of children

Storage should be kept in the shade. Which has good ventilation The area must be dry, not damp because it causes the product to not deteriorate. Product life is 1 year from the date of manufacture. In unopened condition (If not used, the bag must be tightly sealed every time)

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

CATEGORIES